Multilac Hammer Finish Paint Colors

Multilac Hammer Finish Paint Colors

Synthetic Resin-Based Hammer Effect Paint

Multilac Hammer Finish is specially designed for metal surfaces. It will protect and also give a hammer tone texture finish to your paint work

Application

Method of Application: Preferably by brush or roller. Can also be sprayed.

Cleaning of Tools: Brush and other tools must be cleaned with white spirit immediately. Covering Capacity: 16-18 Sq.m / litre (depending on surface)

Drying Time: Touch dry - 15 min Hard dry- 2 hours

Suitable Surface and their Preparation: The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preparation depends on the available surface and it's condition. 

Surface must be allowed to dry and cleaned properly. Do not apply on humid conditions. If the surface is wet and moisture prevails the paint will not give a bright finish.

ADVICE

Technical Assistance: As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note: All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.