Multilac Coach Finish Varnish

Multilac Coach Finish Varnish 

Special Synthetic Resin based varnish

Multilac Coach Finish Varnish is made specially for use on Coach work, Ceiling and where clarity of PU Varnish is not required.

Application

Method of Application: Preferably by brush or roller. Can also be sprayed.

Cleaning of Tools: Brush and other tools must be cleaned with soap water immediately.

Covering Capacity: 15-18 Sq.m / litre (depending on surface)

Drying Time: Touch dry - 2 hours Hard dry - 8 hours

Suitable Surface and their Preparation: The wooden surface must be dry, free from dust and other such separable substances that may prevent good adhesion. Apply Multilac Sanding Sealer as a primer coat for a better finish.

ADVICE

Technical Assistance: As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note: All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.