Multilac Nc Wood Lacquer Gloss
Multilac N.C. Wood Finish is used on all types of wooden furniture and equipment as a top coating for lasting protection and attractive finish.
Multilac Nc Wood Lacquer Gloss
Product Description
Multilac N.C. Wood Finish is used on all types of wooden furniture and equipment as a top coating for lasting protection and attractive finish.
Multilac nitro-cellulose clear lacquer is an ample sturdy and scratch resistant lacquer which gives a good depth and a smooth and attractive surface.
Application
Method of Application: By spray gun.
Cleaning of Tools: Brush and other tools must be cleaned with n.c. thinner immediately.
Mixing Ratio:
1 part by volume n.c. clear lacquer
1 part by volume thinner-for brushing
or 2 part by volume thinner- for spraying
Covering Capacity: 8-15 Sq.m / litre (depending on the method of application)
Drying Time:
Touch dry 10-15 min
Sanding dry- 1 hour
Pilling dry- 2.5 hours
Suitable Surface and their Preparation:
The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preparation depends on the available surface and it's condition.
ADVICE
Technical Assistance: As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.
Please Note: All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.