B N A Bitumen Cutback Graded MC 30 - 200L

B N A Bitumen Cutback Graded MC 30 - 200L

BNA Cutback Grade Bitumen is normally used in spraying and in some mixing application. Cutback Bitumen is penetration grade bitumen blended with a solvent such as kerosene, white spirit, gasoline and naphtha controlling the curing time. Cutbacks are divided into 2 types, Rapid Curing (RC) and Medium Curing (MC) depending on the solve used. Commonly used for road and pavement construction and maintenance. Cutback MC 30 is blended with a solvent such as Kerosene, a medium curing petroleum cutter.

Rs 25,000.00
Tax included
  • Payment policy Payment policy
  • Delivery policy Delivery policy
  • Return policy Return policy

DESCRIPTION

BNA Cutback Grade Bitumen is normally used in spraying and in some mixing application. Cutback Bitumen is penetration grade bitumen blended with a solvent such as kerosene, white spirit, gasoline and naphtha controlling the curing time. Cutbacks are divided into 2 types, Rapid Curing (RC) and Medium Curing (MC) depending on the solve used. Commonly used for road and pavement construction and maintenance. Cutback MC 30 is blended with a solvent such as Kerosene, a medium curing petroleum cutter.

APPLICATION

BNA Cutback MC 30 containing 50% Bitumen, is commonly used as a Prime Coating. The process of priming involves applying a low viscosity binder to a prepared but usually unbound aggregate base. It is intended to be absorbed by the top layers of the base and provide a surface which is more easily wetted by a following bituminous covering. Cutback bitumen which is suitable for priming is also used for Tack-Coating. This is applied to an underlying surface to aid with the adhesion of the following asphalt layer.

PACKING AND SUPPLY

200 L New steel drums or reconditioned steel drums. Weatherproof packing for flexibility of storage.

STORAGE AND HANDLING

Original containers store in a cool dry place. Do not leave containers open.

RECOMMENDED APPLICATION RATE

Priming - Between 0.5L/m2 and 1.4 L/m2. Tack-coating - Between 0.2 L/m2 and 0.4 L/m2.

Recommended Spraying Temperature: 60 °C - 80 °C

TYPICAL PROPERTIES