Multilac Premium Emulsion Brilliant White (Export Quality)
Special-Acrylic-Emulsion-based decorative Wall-Paint for interior use Premium sheen emulsion is a decorative and protective wall paint based on special acrylic for the interior use. It can be used on various types of dry surfaces such as walls, ceilings, concrete, building board, hard board, brick, wallpaper, new or previously painted.
Premium sheen emulsion is a decorative and protective wall paint based on special acrylic for the interior use.It can be used on various types of dry surfaces such as walls, ceilings, concrete, building board, hard board, brick, wallpaper, new or previously painted.
Properties: Scrub-resistant and resistant to cleaning agents. Better adhesion. Unsaponifiable and alkali-resistant. Smooth sheen Pleasant odor. Better colour retention. Allows better flow and dries faster.
Technical Data: Basic characteristics at 20 °C. Solid Content: approx. 50-55% by weight Flash Point: above 90 °C. Vehicle: Special Acrylic-Emulsion. Degree of Gloss: Min 30 at 85 °C angle
Colours: Refer to shade card.
Storage: Store at room temperature between 5 C- 48 °C
Safety Advice: Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.
Waste Removal: Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
Packaging: 1 litre and 4 litres, 10litres, 20 litres containers & 200 litre drums.
Method of Application: Preferably by brush or roller. Can also be sprayed.
Cleaning of Tools: Brush and other tools must be cleaned with soap water immediately.
Covering Capacity: 16-18 Sq.m / litre (depending on surface)
Drying time: 20 minutes , can be recoated in 2-3 hours Suitable Surface and their Preparation The surface must be dry, free from dust and other such separable substances that may prevent good adhesion.
The type of surface-preparation depends on the available surface and it's condition and plastered surfaces must be allowed to dry and be cleaned properly. Lime containing plasters or materials should be neutral.
If reacting alkaline, flush with sweet water till it becomes neutral. Multilac Acrylic Filler could be applied as an under coat for a better finish.
Technical Assistance: As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.
Please Note: All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.