Dr. Fixit Raincoat 2 in 1 (Ultra Brilliant White)

Dr. Fixit Raincoat 2 in 1 (Ultra Brilliant White)

Dr. Fixit Raincoat 2 in 1 is an elastomeric waterproof coating that provides a seamless and tough waterproof barrier with excellent crack bridging ability that can accommodate movements due to thermal variations in the waterproofing system.

Rs 3,895.00
Tax included
 

 

 

Typical Applications

} Building Roofs / Terraces – Flat & Slope.

} Over existing cementitious waterproofing treatments like sound brick-bat coba, concrete screeds, acrylic

coatings, etc.

} All types of exterior masonry surfaces, concrete, cement sand renderings, etc.

Features

} Waterproofing– Provides excellent water resistant barrier on roof / terrace & exterior wall, increases the

durability of structure.

} Tough and abrasion resistant– Suitable for light foot traffic

} Highly durable and light weight– UV resistant and needs no extra protective screed. Provides long time

protection to building that are endangered due to thermal degradation

} Flexible and elastic– Accommodates movements in waterproofing system and covers and bridges hairline cracks

} Easy to apply– No need to remove the existing system. Can be brush or roller applied on vertical surfaces

without sagging.

} Elastomeric High elasticity withstand stress caused by thermal expansion & contraction.

} Eco friendly– Non Toxic water based system

} Durability– Provides long time protection to building that are endangered due to thermal degradation.

Packaging

1, 4, 10 & 20 litres

Method of Application

1 Surface Preparation – Roof

} Prepare the surface thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles.

} In existing old terraces such as brick-bat-coba or screeds, the substrate must be checked for its soundness.

Damaged or hollow portions, sharp edges, etc. must be cut and repaired with a polymer-modified mortar using

Dr. Fixit Super Latex.

} All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X paste

} Bitumen based waterproofing treatments must be completely removed by mechanical scarification or by any

other effective mechanical means.

2 Surface Preparation – Exterior Surface

} All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface

coating.

} Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical

means such as wire brushing & shot blasting. Finally vacuum cleaning of all loose solids and liquids can be done,

if required.

} All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X paste

} Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Super Latex modified mortar. 

https://bnshardware.lk/img/cms/640 Dr- Fixit Raincoat 2 in 1.pdf

10 Items