Multilac Sanding Sealer Teak

Multilac Nitro - Cellulose Sanding Sealer Clear

Micron NC Sanding Sealer is a NC based high viscous and quick drying sealing primer for all kinds of wooden surfaces.

Application

Method of Application:By brush or spray gun.

Cleaning of Tools: Brush and other tools must be cleaned with soap water immediately.

Mixing Ratio: 1 part of sanding sealer with 2 parts of Macksons N.C. Thinner ( by volume)

Covering Capacity: 3-15 Sq.m / litre (depending on method of application)

Drying Time: Touch dry- 10 min Sanding dry- 30 - 60 min Suitable Surface and their Preparation The wooden surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preparation depends on the available surface and it's condition.

ADVICE

Technical Assistance: As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note: All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.