Dr. Fixit Crack X Paste

Description

Dr. Fixit Crack-X Shrinkfree is composed of best quality polymer, properly selected fillers & additives. It is fast drying, flexible, very light weight, soft putty like material used for filling cracks in plastered surfaces because it is 100% shrink free. Typical Applications } Internal & external surface cracks on plaster up to 10 mm width. Features and benefits } Shrinkage –Non-shrink even after cured. } Application – One time crack filling fulfills the requirement hence doesn't need 2nd coat. } User friendly – One pack, very soft paste, easily applicable by fingers or putty knife. } Saving – Saves time, labour & energy. } Paintability – Easily paintable after one Day of application. } Non-toxic – It is non-toxic hence user friendly. Method of Application 1 SURFACE PREPARATION } Surface must be free from dust, oil, grease, and loose particles, etc. Moisten the surface before applying Dr. Fixit Crack-X Shrinkfree. } The cracks must be widened in V shape groove and SSD before filling Dr Fixit Shrinkfree. } For filling Dr. Fixit Crack-X Shrinkfree on the internal surfaces, existing POP or painter’s putty must be removed till plaster surface is exposed. 2 APPLICATION } Press Dr. Fixit Crack-X Shrinkfree firmly into the crack ONE TIME ONLY with a spatula or putty knife and level the surface. } Handball application can also be used as per the convenience. } Care must be taken to avoid formation of cavities or bubbles during application. } Further POP or painters putty application can be taken up once it is fully dry. 3 CLEANING } Clean tools & equipments by soap & water. Wash hands with soap & warm water. Precautions & Limitations } Not for cracks in POP or painter’s putty. } Not recommended to use under the rain. } Not meant for structural cracks in concrete, slab, construction joints. } Jet or Power washing on walls not advisable prior to application. } During application below 10°C, drying time will be delayed. } Container to be tightly closed after application. } If filler compound becomes too dry, add potable water in ratio of 1 teaspoon in 250 ml of Dr. Fixit Crack-X Shrinkfree